Recent content by TennesseeHunter

Sorry I may be illiterate but I still don’t follow. Are you looking for a weatherby chambered in 460? Any mark v rifle or action? Or a mark v chambered in any 378 based cartridge to build a 460 on?

Here are what 90% of my targets look like, more or less. it’s angled down only a couple degrees, which id recommend as much as possible. I just shoot down a hill 6-8 degrees to this target and it angles a bit to one side so there’s already a lot of angle there. I personally like chains. Can...

1/2” ar500 would be a minimum I’d say. I’ll try to get a picture of one of my stands later. I have a couple 3/8” ar500 silhouettes that are perfect on the surface (no divots or anything) but have bent dramatically, even when they’re only shot at >300 yards. Something like if you laid it on a...

Alright I done reckon I could do $210, if that piques anyone's interest.

I’ve shot several hundred Winchester and cci mag primers in the 460. Like has been said already they worked. I never directly compared velocities but would easily achieve moa 3 shot groups and ~10 fps SD. Although looking at my notes it seems I am about 15 fps slower with a federal large rifle...

Looking to sell this one piece scope mount made by Audere. 35 mm main tube with 25 moa of cant. 38 mm high. This is meant to mount a leupold mk 5 on something like an ar-10, Barrett, or anything like that. Would place the scope a bit high for a normal bolt gun. I bought this a few years ago...

Yes you can hardly be too careful. @USMA84DAB I sent a pm a bit ago. I’ll follow up. @AZDAVE thanks for the offer. I’m not exactly sure what my goals are yet but I dont believe that’d work for me. Thanks

That was fast. What are some of details? Like the manufacturer and is it to saami spec or? Thanks

I’m looking to build a rifle in 460. Ive never had anything like this done before so I’m exploring my options. Tricky to find a gunsmith who can do good work, or even understand what I’m talking about most of the time. Also I know they can be bought online. Seemingly are even in stock at some...

Wow very impressive. And I appreciate it. I’d like to build a 475 a&m but the bullet selection is slim enough I’m not sure of any advantage over the 460. Although I do shoot the hawk 0.475 bullets in other cartridges. Also I hope you have a lot of 5744. Not easy to find Nowadays. Thanks again

Ive read that thread. Very interesting by the way. Although have you’ve done much shooting/reloading for it since then. Thanks

Wow very impressive. Have you much experience with the 475 a&m since you’ve got it?

I’m glad you got proper cases. And I’m sure it’ll sling bullets faster than any 45-70 even if it’s slower than if it had a 30-34” barrel. Nothing a bit more elevation on the sight could fix. But full power loads might get taxing from the weight. To shoot long distance reliably you’d probably...

Looks nice. I have only handled pedersolis. Speaking to guys that shoot shilohs, I’ve been told the pedersolis are behind on fit but as good or better when it comes to trigger and barrel. And that your rifle is still pretty good. Although once you get into it might just really feel the need to...

Looks good. And thank you for the pictures.